TingTing Woodworking Machinery Co., Ltd. is one of the leading manufacturers and suppliers of wood dust collection machine in China. As we have world-leading production equipment and strong manufacturing capabilities, we warmly welcome you to buy premium wood dust collection machine from our factory. For price consultation, contact us.
A wood dust collection machine is only worth installing if it actually keeps up with the machines feeding it. The MF9030 draws from three 100 mm inlets, drops the heavier chips into the lower collection bag, traps the fine dust in the upper filter bag, and returns the cleaned air to the workshop. 3 kW motor, 5,600 m³/h airflow, and it arrives assembled on casters - no fixed installation.
3 kW
Pure copper motor
5,600 m³/h
Air flow on the MF9030
0.3 µm
Filtration rating
CE
Certified machine
What the MF9030 does with the air in your workshop
Every cutting, sanding and edge banding operation produces two different things: heavy chips that fall, and fine dust that stays in the air. A single-stage bag collector handles both in one pass.
3 kW
Motor power
5,600 m³/h
Air flow
300 mm
Fan diameter
3 × 100 mm
Inlet diameter
480 × 800 mm
Filter & collection bags
50 kg
Net weight
One pass, two separations
Nothing about a bag collector is complicated. What matters is that each stage does its job without the next stage working against it.
1. Air is drawn from the inlets
A 300 mm fan driven by a 3 kW pure copper motor pulls air through three 100 mm inlets. In a workshop the inlets are normally run as a single header with blast gates, so one collector can serve several machines instead of one unit per machine.
2. Heavy chips drop out first
Heavier material loses velocity as it enters the body and falls into the lower collecting bag. Taking the bulk out first is what keeps the filter bag from loading up within a single shift.
3. Fine dust is trapped above
What is left is the fraction that matters most for air quality. The upper filter bag traps particles down to 0.3 micron at up to 99.97% efficiency, which is the range where airborne wood dust is hardest to capture and worst to breathe.
4. Clean air goes back to the workshop
The unit is not ducted to the outside, so the workshop does not lose heated air in winter and you do not need to cut a hole in the wall. There is no exhaust duct to plan around.
5. Emptying without tools
The lower bag uses a quick-connect fitting with an elastic band. Emptying it is a hands-on job of a couple of minutes rather than a maintenance task, which is the difference between a collector people actually use and one they leave switched off.
6. On casters, wherever it is needed
Four casters and a one-piece moulded base mean the collector is repositioned rather than installed. That matters in a shop where the layout changes as the order book changes.
MF90 series technical specifications
The MF9030 is the model most workshops start with. Step up through the range as the number of
extraction points and the length of ducting increase.
| Specification | MF9030 | MF9040 | MF9055 | MF9075 |
|---|---|---|---|---|
| Motor power | 3 kW | 4 kW | 5.5 kW | 7.5 kW |
| Fan diameter | 300 mm | 355 mm | 355 mm | 355 mm |
| Inlet diameter | 3 × 100 mm | 4 × 100 mm | 6 × 100 mm | 6 × 100 mm |
| Air flow | 5,600 m³/h | 6,300 m³/h | 7,300 m³/h | 8,200 m³/h |
| Filter bag (upper) | 480 × 800 mm | 630 × 1000 mm | 630 × 1000 mm | 630 × 1000 mm |
| Collecting bag (lower) | 480 × 800 mm | 630 × 1000 mm | 630 × 1000 mm | 630 × 1000 mm |
| Overall size | 1420 × 495 × 2100 mm | 1460 × 690 × 2400 mm | 1460 × 690 × 2400 mm | 1460 × 690 × 2400 mm |
| Packing size | 1420 × 495 × 645 mm | 1460 × 690 × 690 mm | 1460 × 690 × 690 mm | 1460 × 690 × 690 mm |
| Net weight | 50 kg | 75 kg | 75 kg | 75 kg |
| Gross weight | 52 kg | 78 kg | 78 kg | 78 kg |
| Filtration rating | 0.3 micron, efficiency up to 99.97% |
|---|---|
| Working principle | Single-stage bag collection (not a cyclone) |
| Voltage | 380 V / 50 Hz / 3 phase (optional) |
| Automatic switch | Synchronises with a woodworking machine up to 3 kW |
| Mobility | Four casters fitted as standard |
| HS code | 8421392290 |
| Production capacity | 20,000 sets per year |
| Warranty | One year limited warranty, motor and key components |
Voltage, frequency, inlet configuration and paint colour are confirmed before production starts. Send us your panel list and the number of extraction points and we will match the model to the job rather than quoting the largest unit.
The parts that decide whether a collector gets used
Pure copper motor
The motor uses copper windings rather than aluminium, is permanently lubricated and fan-cooled, and is rated for continuous duty. A dust collector runs for as long as the machines it serves, so this is the specification that decides how many years you get.
One-piece moulded housing and base
The base plate and the fan housing are moulded as single pieces rather than assembled from welded sections. Fewer joints means less vibration and fewer places for air to leak between the fan and the collection bags.
300 mm impeller
The impeller is sized to move 5,600 m³/h through the standard three-inlet configuration. On a short direct hose run the pressure loss is low, which is why this model copes with a panel saw and an edge bander running from one header.
Bags that come off by hand
Quick-connect collection bags with an elastic band, so emptying is done without tools and without dismantling the machine. Replacements are a standard consumable we keep in stock.
Automatic switch
The MF9030 can be wired to start and stop together with a woodworking machine drawing up to 3 kW, so the collector is not running when nothing is cutting. It saves power and, more usefully, removes one more thing an operator has to remember.
Standard electricals
The electrical components are common branded parts rather than a proprietary assembly, so an electrician in your own country can identify and replace them. Voltage and plug type are set for your market before the machine ships.
Single-bag or twin-bag, your choice
The same machine is supplied in a single-bag and a twin-bag configuration. Twin bags give you more filter area and a longer interval between emptyings; the single-bag version is the more compact unit for a shop where the collector sits beside one machine.
Filter area matched to your run time - more bags means less frequent bag changes
Both configurations on casters, so the unit moves with the layout of the shop
Replacement bags held in stock as a standard consumable
Paint colour and logo can be specified for OEM and ODM orders
Six workshops that get the most from this collector
If your work looks like any of these, the MF9030 is worth a serious look. If it looks like none of them, tell us what you actually run - we would rather point you at the right model than sell you this one.
Small cabinet and joinery shops
One or two machines, a collector that can be rolled to whichever is running, and a bag that is emptied by hand in a couple of minutes. This is the shop the MF9030 is sized for.
Panel saw owners
A panel saw produces a heavy chip load in a short burst. Three inlets let you dedicate one to the saw and keep two free for whatever else is running.
Edge banding stations
Edge banding produces both chips and fine dust from the trimming units, and the extraction points sit close together. A short header run from one collector covers the whole station.
CNC router and nesting cells
Where the cutting head moves, the extraction point has to follow it. A collector with enough airflow at the shoe keeps the cut clean and stops fine dust settling over the whole cell.
Sanding and drilling stations
Sanding produces the finest fraction, which is where the 0.3 micron rating stops being a specification and starts being the reason you bought the machine.
Shops adding a station, not a line
When an existing collector is at capacity, adding a second MF9030 is usually cheaper and faster than re-piping the whole shop around a larger central unit.
Packed for the route, loaded to fill the container
From our floor to yours
Every unit is run and checked before it is packed. Machines travel in a reinforced crate sized for container loading, and because a dust collector is a compact unit it is usually shipped alongside edge banding machines, drilling machines or other equipment rather than occupying a container on its own.
Tested before packing, not just assembled and boxed
One-piece moulded base and housingtravel with less risk of transit damage
Loading plan prepared with the quotation so the container is filled properly
Send us your destination port and the packing and loading proposal comes with the price
What buying from the factory actually changes
You reach the technical team
Configuration questions go to the people who build the machine, not through a reseller. Pre-sales consultation is free, and our sales engineers are trained on the equipment.
Configuration before quotation
We ask about the number of extraction points, the ducting run and the material you cut before recommending a model, rather than sending a generic price for a generic unit.
Layout advice, not just a machine
We help work out how the collector sits in your shop and how the ducting reaches each machine, so it does not become a bottleneck the week after installation.
Installation and training
Detailed installation guidance is supplied, and senior engineers can be dispatched for on-site commissioning and operator training.
Support after the sale
24/7 online technical support with spare parts held in inventory, plus scheduled equipment inspections and remote diagnostics. Replacement bags are kept as a standard stock item.
An established export process
Manufacturing since 2010, we ship to Europe, North America, Southeast Asia, the Middle East and South America, so documentation, packing and loading are routine rather than experimental.
MF9030 dust collector image gallery
Fan housing and motor packed in the crate
Frequently asked questions
What is a wood dust collection machine used for?
A wood dust collection machine captures the chips and airborne dust produced by sawing, sanding, drilling and edge banding. It separates the heavier material into a lower collection bag and traps the fine fraction in the upper filter bag, then returns the cleaned air to the workshop.
How do I choose between the MF9030 and the larger models?
Match the model to the number of extraction points and the length of ducting rather than to the size of the workshop. The MF9030, at 3 kW and 5600 m3/h with three inlets, suits a single machine or a small shop. Step up to the MF9040, MF9055 or MF9075 as inlet count and ducting length increase.
What does a 0.3 micron filtration rating mean?
It means the filter bag is rated to capture particles down to 0.3 micron, with efficiency up to 99.97% in that range. For woodworking this matters because the finest dust is the fraction that stays airborne longest and is hardest to breathe.
Can the collector switch on automatically with my machines?
The MF9030 has an automatic switch that starts and stops the collector together with a woodworking machine drawing up to 3 kW, so it is not running when nothing is cutting.
Is this a cyclone dust collector?
No. The MF90 series is a single-stage bag collector: heavy chips drop into the lower collection bag and fine dust is trapped by the upper filter bag. A cyclone separates material using a conical vortex and is a different design, so we describe this series as a bag-type collector rather than a cyclone.
How many extraction points can one collector serve?
The MF9030 is supplied with three 100 mm inlets. The MF9040 has four, and the MF9055 and MF9075 each have six. In a panel furniture workshop the inlets are usually run as one header with blast gates, so several machines share a single collector instead of one unit per machine.
How is the machine packed and shipped?
Every unit is packed in a reinforced crate sized for container loading and can be shipped alongside other equipment. The MF9030 packs into a 1420 x 495 x 645 mm crate at 52 kg gross.
Can you supply OEM or ODM versions?
Yes. Paint colour, logo placement, voltage and inlet configuration can all be built to your specification. Confirm your requirements when ordering.
