English
TingTing Woodworking Machinery, as a leader in the manufacturing and export of woodworking machinery, has been deeply rooted in the industry for over 15 years. We not only have an experienced R&D and design team but have also built a global sales network and a responsive, professional after-sales service support system, committed to providing customers with efficient and reliable complete solutions.
We specialize in the design and manufacturing of high-end woodworking machinery. Our main product lines include: High-performance automatic edge banding machines, CNC Drilling and Cutting Machine，precision multi-spindle drilling machine, heavy-duty precision sliding table saws, intelligent electronic saws, and multi-function CNC Router. All equipment utilizes high-quality materials and advanced manufacturing processes, ensuring exceptional processing accuracy, operational stability, and long service life.
Edge banding is the core of the range, not a catalogue filler. Twelve models across two platforms, all built on the same station architecture.
Bodies run from 1,750 mm to 3,880 mm. The TT-306series fits a one-bay workshop; the TT-308series runs a full finishing sequence without a second building.
The TT-306DBT takes panels down to 80 × 50 mm thanks to independent dual-motor end trimming — drawer fronts and door rails included.
Delta touch screens, LS (Korea) PLC, inverter and contactors, Shihlin drives. Components you can source locally in most markets.
Voltage, frequency, control language, station mix and branding are settled before production — not negotiated after the deposit.
Touch screen, inverter and PLC carry two years; motors carry one. Technical support continues past the warranty period.
Before you compare individual models, decide which platform you are on. This single choice removes about 70% of the spec sheet.
For growing shops and small-to-medium furniture factories that need a full finishing sequence in a bay, not a hall.
For mid-size and large furniture manufacturers running continuous shifts where changeover time is the real cost.
Every figure below is the standard build. Voltage, frequency, control language and optional stations are settled before production begins.
An edge bander is judged at the seam. Everything below exists to make that seam consistent on panel number 1 and panel number 4,000.
Two 1.1 kW motors at 12,000 rpm square the panel edge with PCD cutter heads before adhesive is applied. A square edge is what keeps the band sitting flush a year later — skip this station and every later station is compensating.
On the TT-306DBT and the 308 range, each trim head is driven independently with a fully direct-drive structure. No intermediate transmission in the setup chain, and small or short workpieces that a single-motor trimmer struggles with become routine.
The glue tank comes out for cleaning without dismantling the station, and the spiral geometry keeps adhesive circulating evenly. A pre-heat function holds glue performance stable in cold-weather conditions.
Every parameter is adjustable on screen, with a panel counter that totals running length and working time. Interface languages include English, Russian, Italian and Spanish — configurable to your operators, not just to the export market.
Corner rounding (Homag-style geometry on the 306DSA) removes the sharp tape corner that catches on a cloth. Scraping clears the tape surface marks, then buffing polishes the edge to a uniform sheen.
The press beam follows panel thickness automatically up and down, and the conveyor stops if a board exceeds the preset thickness. Automatic standby with one-button wake-up cuts idle power between jobs.
Production base in Changshu, Jiangsu — 150 km from Shanghai Port and 20 km from the high-speed rail hub, which is why sea, land and air freight all stay on schedule.
Voltage, frequency, language, station mix and optional units confirmed in writing before the order is released.
Integrated frame welded and machined; the 308 platform uses a heavier base for continuous-shift duty.
Pre-milling, gluing, end and fine trimming, corner rounding, scraping and buffing installed in sequence.
Delta touch screen, LS (Korea) PLC, inverter and contactors, Shihlin drives, wired and labelled.
Test panels run through every station; edge quality, safety guards and CE conformity verified before packing.
Rust and moisture treatment, multi-layer PE film, tools packed separately, fumigation-free plywood case on a pallet.
A board enters at the infeed and leaves finished — Pre Milling，Gluing，End Cutting，Fine trimming，Corner Rounding，Scraping，Buffting — every station works on the same panel in the same continuous movement.
Watch TT-308DSP VideoPanel mix decides the model more often than daily output does. These are the four production profiles we size against most often.
Long, straight runs plus a steady supply of drawer fronts and shelf edges at 18 mm. Consistency across a batch matters more than peak speed.
Mixed panel sizes, frequent changeover, high visible-edge standard. The bottleneck is normally setup time between orders, not feed rate.
Volume batches of desktops, storage units and workstation panels in melamine and laminate, where edge colour match and seam tightness are specified.
High unit counts, thin edge tape, tight tolerance on trimmed ends. Every millimetre of over-trim becomes a visible defect in a carton.
OEM and ODM are standard on this range. These six items are settled at order confirmation — after the machine is built, they become change orders.
Add or remove corner rounding, scraping, flat scraping, cleaning unit or pre-heating. A cleaning unit can sit before pre-milling or before buffing depending on your dust layout.
Standard build is 380 V / 50 Hz three-phase. Optional configurations for other supply standards are available — tell us your site supply, not the one on our datasheet.
English, Russian, Italian and Spanish ship as standard. Additional interface languages can be customised, which matters when your operators are not your buyers.
PVC, ABS, veneer, melamine and acrylic tapes are supported across both platforms. Tape thickness from 0.3 mm on the 308 platform and 0.4 mm on the 306; 3 mm needs custom cutters.
Roller tables and return conveyors can be added so the machine sits in a cell rather than as a stand-alone unit. The 306 and 308 both support circular processing layouts.
Machine appearance, logo placement and colour are customisable under OEM/ODM, so the unit carries your identity in your showroom and on your service documentation.
Machine price is a one-time number. Floor space is paid monthly, and changeover time is paid on every order — which is why a cheaper machine can cost more by the second year.
The TT-306 series is designed as a compact, cost-effective solution for small and medium furniture factories. The TT-308 series offers higher configuration options, faster production efficiency and more advanced processing functions for larger-scale production. Practically: the 306 platform runs a single 8 m/min feed with a minimum panel of 120 × 80 mm on most models, while the 308 platform offers three selectable speeds (8, 12, 16 m/min), a minimum panel of 100 × 45 mm, edge tape from 0.3 mm, and corner rounding as standard on the DS and DSA.
The TT-306DBT, at 80 × 50 mm minimum panel. It uses a dual-motor end trimming unit with independently driven heads, which is what allows it to process shorter and narrower workpieces that a single-motor end trimmer cannot manage well. If your work includes drawer fronts, door rails or small cabinet components, this is the model to start from.
Panel thickness is 10–45 mm across every model in both series. Edge tape runs 0.4–2 mm on the TT-306 platform and 0.3–2 mm on the TT-308 platform. A 3 mm tape requires custom cutters — mention it at enquiry stage, not after the order.
The TT-306 and TT-308 series support PVC, ABS, veneer, melamine and acrylic edge tapes. Panels can be MDF, plywood, particle board, melamine board, PVC board, acrylic or solid wood.
Yes. We support OEM and ODM including customised machine appearance, logo, functional configuration, voltage and frequency requirements, and complete production solutions. Customisation is confirmed before production starts.
Touch screen, inverter and PLC carry a two-year warranty; motors carry one year. Technical support and spare parts continue after the warranty period, with remote online service included. Most standard models are held in stock; lead time for custom-configured machines depends on the specific configuration and is confirmed at quotation.
Four numbers are enough: smallest panel you run, largest panel you run, panel thickness range, and panels per shift. With those we recommend a platform and a station mix, not a price list.
Send Your RequirementsTingTing Woodworking Machinery Co., Ltd. is one of the most professional edge banding machine manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy advanced edge banding machine at competitive price from our factory. If you have any enquiry about cooperation, please feel free to email us.
