Full Automatic Edge Banding Machine

Full Automatic Edge Banding Machine

Finding a full automatic edge banding machine that fits a tight workshop while still producing factory-grade edges is a common challenge for panel furniture makers. The TT-308DSP was designed for exactly that situation. Its integrated frame keeps the full finishing sequence inside a compact body, so a growing factory can lift capacity without redrawing its floor plan or buying extra floor space. On this automatic edge banding machine, six stations run back to back: pre-milling, glue application, end trimming, fine trimming, scraping and buffing. Panels leave the line with a tightly bonded, uniform and clean edge. The machine handles MDF, plywood, particle board and most other engineered wood panels, and it is equally suitable for cabinet doors, wardrobe components, office furniture and flat-pack production.
Send Inquiry
Functions

TingTing Woodworking Machinery Co., Ltd. is one of the leading manufacturers and suppliers of Full Automatic Edge Banding Machine in China. As we have world-leading production equipment and strong manufacturing capabilities, we warmly welcome you to buy premium Full Automatic Edge Banding Machine from our factory. For price consultation, contact us.

 

 

product-1812-411

 

Automatic Edge Finishing for Efficient Furniture Production

A dependable edge finish affects both product appearance and downstream assembly. The TT 308DSA is designed for manufacturers that need a practical balance of process coverage, operator control, and workshop footprint. Instead of moving panels through separate stations, operators can complete the key finishing stages on one machine.

For factories adding capacity or replacing manual steps, this full automatic edge banding machine configuration supports repeatable work while keeping the layout manageable. Adjustable speed options and touch-screen settings make it easier to adapt to panel types and daily output

 

 

Key Advantages

 

  • Compact and economical build that brings edge banding machine automatic operation within reach of smaller workshops
  • Automatic up-and-down adjustment that adapts to boards of different thickness
  • Three selectable feed speeds for flexible production planning
  • Multilingual control interface, including Italian, English and Russian
  • Conveyor stops automatically when a panel exceeds the preset thickness
  • Energy-saving standby mode with one-button wake-up
  • Electrical components sourced from internationally recognised brands

 

 

Technical Data

 

MODEL

TT-308DSP

Panel Length

≥100 mm

Panel width

≥45 mm

Panel Thickness

10-45 mm

Edge Thickness

0.3-2 mm(if 3mm,need custom cutters)

Speed

8,12 ,16m/min

Voltage

380V,50HZ,3Phase(Optional)

Power

8.15kw

Pneumatic Power

5 bar

Machine Size

3450x780x1420mm

Packing Size

3380*575*1520mm

Gross Weight(Wooden case)

910 /860KG

 

 

Details

Each station on the TT-308DSP is described below, together with the hardware behind edge banding machine automatic operation. Together these components keep edge quality consistent across a full production shift, from the first panel of the morning to the last of the night.

Touch Screen Controller

  • Delta-brand touch screen as the main operator interface
  • Every machine parameter can be adjusted directly on screen, keeping edge banding machine automatic adjustment accurate on every panel
  • Built-in panel counter that calculates both running length and working time
  • Emergency stop switch for immediate machine shutdown
  • Language options include English, Russian, Italian and Spanish
product-1022-718
product-1022-718

 

product-1208-733
product-1208-733

 

product-800-800

Pre milling Unit

 

The pre-milling station squares the panel edge before glue is applied, which is what allows the finished edge to sit flush and stay tight over time.

  • Two high-speed motors rated 1.8 kW × 2, running at 12,000 rpm / 200 Hz
  • PCD cutter heads with dimensions Φ80 × Φ20 × H45

Gluing  Unit 

 

  • High-efficiency glue application for a strong, even bond
  • Pre-heat function that keeps glue performance stable in cold winter conditions

product-800-800
product-1080-1080

End Trimming Unit

  • Twin-cylinder configuration for a stable cutting action
  • Two high-speed motors rated 0.35 kW × 2 at 12,000 rpm / 200 Hz
  • Three feed speeds available: 8, 12 and 16 m/min
  • Clean and consistent trim at the leading and trailing edge

Fine Trimming Unit

 

 

  • Two high-speed motors rated 0.5 kW × 2 at 12,000 rpm / 200 Hz
  • Tilted motor design for accurate profiling
  • Large-diameter dust hose that improves chip collection
  • Higher machining precision on the top and bottom edge
product-1080-1198
product-1080-1080

Scraping Unit

 

 

  • Clears residual marks from the tape surface
  • Produces a smoother, more uniform panel edge
  • Fitted with a circular copy wheel
product-1080-1080

Buffing Unit

  • Simple adjustment for different panel types
  • Fast buffing wheel replacement to reduce downtime
product-800-800

Press Beam

  • Automatic up-and-down movement that follows panel thickness

Cleaning Unit(Optional)

  • Can be installed ahead of the pre-milling station
  • Or positioned before the scraping station

 

product-1600-544

product-1440-1080

Electrical accessories

 

  • LS (Korea) PLC, inverter and contactors throughout the control cabinet

Other Details pictures

 

product-1018-891

 

 

 

Certification Packaging and Support

 

The TT-308DSP edge banding machine automatic holds CE certification, confirming that the machine meets European requirements for safety, health and environmental protection. The certificate reflects the manufacturer's ongoing focus on build quality, safe operation and compliance with international production standards.

1

 

Packaging

 

Wrapped in protective plastic film

Secured inside a wooden case; wooden pallet available as an option

 

product-1402-1122

 

 

Why Choose TT-308DSP

 

Consistent quality has made the TT-308DSP a steady seller in markets worldwide. It is built for manufacturers who need repeatable edge results, dependable day-to-day operation and solid throughput. Its configuration and straightforward operation suit growing furniture factories as well as established professional woodworking businesses.

If your workshop needs a durable, efficient full automatic edge banding machine with pre-milling, the TT-308DSP offers dependable performance, sensible automation and strong value for the investment.

Send Inquiry
Send Inquiry