If the edge banding strip fails to adhere firmly to the board edge, it can be repaired with glue; if necessary, the edge banding strip can be torn off, sawed off, or milled off and re-applied; when rust spots are found on the board, apply rust-preventive oil to the machine promptly; regularly maintain the edge banding machine, especially the glue application device.
The testing of woodworking straight edge banding machines must comply with several national and industry standards: GB/T 14384-2017 "General Technical Conditions for Woodworking Machine Tools" specifies the basic safety requirements and precision standards for machine tools; QB/T 3911-2018 "Plate Furniture Machinery - Woodworking Straight Edge Banding Machines" specifically specifies the performance parameters and testing methods for edge banding machines in detail. Key performance indicators include: the edge banding peel strength should not be less than 3.5 N/mm; the edge banding joint gap should not be greater than 0.1 mm.
